|
with
DIY AV Plug-In 20 metre Cable & Adaptor Set + $30
DIY Plug-In
installation when purchased with Plug Pack and Cable/Adaptor Set.
1/3" SONY HI-SENSITIVITY
Hole-Accumulation-Diode Low-Noise SENSOR and SONY SIGNAL PROCESSING,
TIMING/SIGNAL GENERATOR CHIPSET, inbuilt MICROPHONE &
PRE-AMPLIFIER
Suitable for Low-Light, Infrared Illumination and High Resolution
applications.
500 (H) 582 (V), 291 000 ACTIVE elements
480 + Line Horizontal Resolution
* NEAR SUPER-VHS QUALITY *
~ 0.05 lux @ F1.2 Infra-Red & Low Light Sensitive
Automatic Electronic Shutter Linear 1/50 - 1/100 000 second
Automatic Gain Control 18 dB
Signal : Noise Ratio > 48 dB
Spectral Sensitivity ~ 400 to ~ 1000 nm
Wall Mount: Tilt > 180°, Pivot > 360°, Pan = Nil
Ceiling Mount: Tilt > 180°, Pan > 360°.
Standard CCIR 75 ohm Composite Video Output, BNC socket
Line Level audio output, RCA socket
12 Volts DC Regulated ~ 110 mA, 2.1 mm × 5.5 mm socket
Supplied with ~ 30 cm Cable with sockets
36 mm (W) 36 mm (H)
Depth with 3.6 mm lens ~ 29 mm. Depth with 5 mm Pinhole lens ~
18 mm
Weight 66 grams
Made in: Taiwan
Manufacturer's Experience: ~ 3
Years in CCTV
Accessories:
Plug-In DIY AV 20 metre Cable / Adaptor Set: 20 metre AV Cable
with moulded Plugs & Socket. Two RCA Plugs & DC Plug for camera end,
Two RCA Plugs & DC Socket for Plug-Pack & Monitor/VCR/Etc. Two BNC-RCA
Adaptors to connect to Camera and/or
Monitor/VCR/Quad/Switcher/Multiplexer/Etc.


Board
Lenses: 2.1, 2.5, 2.9, 3.2, 3.6, 4, 4.3, 5.7, 6, 8, 12, 16 & 25
mm.
Pinhole Lenses: 3.2, 3.7 & 5.5 mm
CCTV-TV/VCR INTERFACE MODULE
PROTECTIVE
COMPONENT PACK
Single Cable Solutions
Infra-Red Illuminators
Infra-Red LEDs
Infra-Red Pass Filters
Infrared Cut Filters
Coloured
Filters
Polarising Filters
Things
|
|