|
Extraordinarily High
MegaPixel
Resolution Images !
pictured with
optional Lens |
1280 x 960
⅓" SONY
Progressive
Scan 1 228 800 Pixel CCD
for: extraordinarily
Crisp, Detailed & Low Noise Images and
significantly Higher Sensitivity (low light &
Infrared) than ordinary CMOS Image Sensor
J
Wireless WEP 64 / 128-bit, WPA, PSK IEEE 802.11b/g
J
Optional 5 ~ 18 dB Gain Antennas for increased Range
J
Two Alarm Inputs Two Alarm Outputs
J
Two-Way Audio ideal for entry communication and access
control (using Alarm Output)
J
SD Memory Card slot for Back-Up Recording if Network
Fails
J
SMA female RF Antenna
output (2.4 GHz) for easy connection of Coax Cables &
High Gain Antennas to increase range
J
This Camera utilises an
Automatic mechanically movable Infrared Cut Filter for
Vivid Colour Rendition & maximum low light & Infrared
Sensitivity solving the shortcomings associated with
ordinary Day / Night Colour Cameras
J
Built-In Power over
Ethernet (wired connection)
J
free:
SDK &
API for System Integrators & Software Developers
|
|
EXTRA-HIGH
MEGAPIXEL RESOLUTION
Wireless
Network Megapixel CCTV Camera
1280 H-Pixel Colour Day / Night Infrared Sensitive with
Motorised movable IR Cut Filter.
Wireless WEP 64 / 128-bit, WPA, PSK IEEE 802.11b/g .
Easily relocatable Wireless Network Megapixel CCTV
Security Camera just connect to Power.
Wide range of lenses available 2.8 mm to 55 +
mm. Use 55 mm Lens for full
screen 'Head & Shoulders' or 'Cash Drawer' shots at 10 +
metres.
Suitable for Extra High Resolution images and high to low
illumination levels in Homes, Shops, Showrooms, Offices,
Warehouses, Outdoors, etc.
MPEG4 / MJPEG 640 x 480 Real-Time 25 ips Live Monitoring.
MPEG4 15 ips / JPEG 12.5 ips 1280 x 960 Live
Monitoring
IE Browser Remote View.
Two-Way Audio for direct communication /
intercom.
Dual streaming MPEG-4 / JPEG codec with
adjustable quality/compression to cater for fast/slow &
narrow/wide Bandwidth Networks.
Video Motion Detection 3 Zones & 10
Sensitivity Levels.
Centa-View Remote monitoring and recording software.
Optional
Maxi-Watch Megapixel multiple-brand (Axis™,
ACTi™,
Panasonic™,
Sony™,
D-link™,
Lumenera™,
Mobotix™,
PIXORD™,
Vivotek™,
JVC™)
software available.
Central Monitoring System & SDK
for integration available.
HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, 3GPP, UPnP.
FTP - e-mail - Dynamic Domain Name Server (DDNS)
capabilities.
SD Flash Memory Card Slot for backup protects
against network failure.
Order Code: [IPw-CSdnProg]
$919
$735 < 5 + >
ISO9001
Taiwan Quality
OPTIONS
[REG12/1A]
Plug Pack Regulated 12 VDC 1 Amp
$20
[Cable-LANxo] Crossover LAN Cable
$10 (simplify initial setup)
[SD-2GB] 2 GigaByte SD Memory Card
$25
[Rect-Reg+]
Rectifier Regulator for long cable run, 24 vac power,
etc
Use existing
Composite Video Coaxial Cable for Network low cost easy
speedy analog-cctv to Network-CCTV conversion
more...
|
|
to view pages from IP Network Megapixel CCTV Security Camera
'User's Manual'
to view pages from free
Centa-View Remote Monitoring Recording Software 'User's
Manual'
All values are approximate. |
@ 3 metres |
@ 5 metres |
@ 9 metres |
@ 15 metres |
Width of Vision with 2.8 mm / 3 mm Lens |
4.9 metres |
8.2 metres |
14.8 metres |
24.8 metres |
Width of Vision with 8 mm Lens |
1.8 metres |
3 metres |
5.4 metres |
9 metres |
Width of Vision with 12 mm Lens |
1.2 metres |
2 metres |
3.6 metres |
6 metres |
Width of Vision with 50 mm Lens |
0.29 metres |
0.48 metres |
0.86 metres |
1.4 metres |
Additional Lens selection info
here |
|
|
|
|
|
|
Camera/ SD / Mechanical
Image Device: 1280 (H) x 960 (V)
1 228 800 Pixel
1/3" Sony Progressive Scan CCD image Sensor.
Lens: C
or CS Mount, Lens is NOT SUPPLIED with this Camera,
compatible lenses are: C
Mount (with
C-Spacer), CS Mount, Fixed, Manual Iris & Auto Iris 1/3" &
1/2" types on
this page,
EXCEPT Cat
Codes: CC21, CC25, CC21IRC, CC40, CS25MI & CS25AIDC
IP Camera Lens.
Horizontal
Resolution (Pixels): ~ 1280, this value is provided for
comparative purposes only.
Minimum
Illumination: ~ 0.6 lux @ F1.0 without IR CUT filter, 3200º
Kelvin with AGC = On, this value is provided for comparative
purposes only.
Movable Infrared Optical
Filter:
Colour
sub-carrier is turned off (Colour-Killer) to improve Signal to
Noise Ratio when IR-CUT filter is out of
optical path .
In Day mode (well lit, colour)
mechanism automatically positions IR-CUT
optical filter between Lens and Image Sensor to exclude
Infrared radiation that would otherwise adversely affect
colour reproduction, this ensures colour
rendition not possible with ordinary non-filtered or
notch-filter type Day/Night cameras.
In Night mode (low light,
monochrome)
Colour-Killer is activated and mechanism
automatically removes IR-CUT optical filter to allow
Infrared radiation to pass boosting low light and Infrared
sensitivity, the result is significantly better night images.
Switch-Over/Colour-Killer
points are: Colour to Monochrome
~ 3 Lux, Monochrome
to Colour ~ 7 Lux.
Automatic Electronic Shutter
(AES):
User configurable
On =
1/50 to 1/10 000 second, 20 to 0.1 milliseconds, Off =
20
milliseconds for use with an Automatic Iris Lens, low 20 ms
shutter speed reduces/eliminates smear associated with High
Shutter Speeds that are necessary to control exposure with a
Fixed Iris Lens,
additional
CCTV Automatic Electronic Shutter information.
Spectral Response:
~ 400 to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical
path, additional
CCTV Infrared Night Vision information.
Automatic Iris (AI)
Lens Output: DC Drive, common 4 pin socket, rotary
Potentiometer level control.
Automatic Gain
Control (AGC): User configurable.
Back-Light
Compensation (BLC): User configurable.
Automatic White Balance (AWB): User
configurable.
Made in Taiwan in an
ISO 9001 certified factory.
Manufacturer's
Experience: 20 + Years.
SD card management
Recording Trigger: Motion Detection, IP check,
Network break down.
Video Playback: Yes.
Card Slot: Rear of Camera.
Compatibility: 128 MB to 4 GB SanDisk or
Transcend.
INPUT / OUTPUT
Video Output: 1.14 V p-p
Composite Video 29 MHz Bandwidth
75 ohms, BNC socket, used for Lens setup &/or independent
monitoring using Wide-Bandwidth
Video Monitor.
Audio Output: Line Level output
for Amplified Speaker, 3.5 mm Phono Socket.
Alarm: 2 x Inputs, 2 x
Outputs, 8 pin Mini-Din socket.
NETWORK: Standard RJ45
8p8c socket.
Radio Frequency:
Standard SMA socket, external thread, socket contact.
Power: 12 Volts DC Regulated ~
500 mA (~ 600 mA Peak, 2.1 x 5.5 mm DC socket, center pin = (+).
Also has Built-In Power over Ethernet.
Dimensions: ~ 80 mm Wide, ~ 70
mm High, ~ 145 mm Deep, excludes I/O sockets/connectors, ~ 480
grams.
|
Network / Software /
Wireless
Protocols: HTTP, RTSP, ARP, ICMP, TCP/ IP, UDP,
SMTP, FTP, PPPoE, DHCP, DDNS, 3Gpp, UPnP.
System: Name, Location,
Admin ID & Password.
TCP/IP: Static IP
Address, IP Address, Subnet Mask, Default Gateway, Dynamic IP
Address, DHCP, PPPoE (User ID - User Password), Primary DNS
Address, Secondary DNS Address, Dynamic DNS, UPnP.
Users: 3 levels,
Administrator / Viewer.
Date Time Settings:
Y/M/D, H/M/S, NTP Protocol, NTP Server Address: Adjust
frequency Time Zone.
Compression: 5 levels.
Frame Rate: Adjustable.
Resolution: QCIF, CIF,
VGA, Quad-VGA (Full scan mode 1280 x 960).
MPEG4 / MJPEG 640 x 480 Real-Time 25 ips Live Monitoring.
MPEG4 15 ips / JPEG 12.5 ips 1280 x 960 Live
Monitoring
Image: Rotation, Flip.
Digital: Pan / Tilt /
Zoom.
Camera settings:
Brightness, Contrast, Sharpness, BLC, White Balance.
Upload configuration:
FTP, SMTP.
Dynamic DNS: Service,
User Name, Password, Domain Name.
Motion Detection:
Sensitivity adjustable, Masking configurable.
Alarm & Motion
Detection Actions: e-mail, upload to ftp, alarm out.
Triggered Actions:
e-mail, upload to ftp, alarm out, send notification to
TCP/HTTP server.
Open API: CGI commands
for Camera control, Media SDK for streaming.
Centa-View Remote monitoring and recording software.
Optional
Maxi-Watch Megapixel multiple-brand (Axis™,
ACTi™,
Panasonic™,
Sony™,
D-link™,
Lumenera™,
Mobotix™,
PIXORD™,
Vivotek™,
JVC™)
software available.
Backup SD Card 128 MB to 4 GB SanDisk or
Transcend Card.
Ethernet LAN / WAN Port 10/100 Base-T , RJ45
connector.
Web Browser Microsoft Internet Explorer 6.0 or
above.
SDK: available for integration.
Audio 2 Way.
Wireless
WEP 64 / 128-bit, WPA,
PSK IEEE 802.11b/g .
TX Output Power
typically: with Ant-W5dB Antenna, CCK 14 ~ 16 dBm (~ 30 mW),
OFDM 10 ~ 13 dBm (10 ~ 20 mW).
RX Sensitivity
typically: with Ant-W5dB Antenna, 11 Mbps <-84 dBm, 54
Mbps <-70 dBm.
|
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones,
Wireless LAN, etc), Antenna Alignment, Electromagnetic &
Radio Frequency interference in the vicinity. This device may be
affected by and may affect other devices that operate on or near
the same frequency causing minor to severe interference.
In ideal, clear, Line-of-Sight
conditions
with Ant-W5dB Antenna and communicating with a device of same or
higher Output & Sensitivity
up to ~ 100 metres.
Correctly matched and aligned 24
dBi antenna on one device up to ~ 1000 metres.
Correctly matched and aligned 24
dBi antenna on both devices up to ~ 2000 metres.
Due
to the nature of Radio Signals results are unpredictable (in the
same manner as Mobile / Cellular Telephones) signals reflected
from surrounding objects arriving at Receiver antenna may Add-to
or Subtract-from the direct signal from Transmitter. Directional
antennas may reduce affect of reflected signals.
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on either/or
both devices. For maximum signal transfer both antennas should be
the same polarity, that is both oriented Vertically or
Horizontally.
 |
Cat
Code: Ant-Stub
$15
2.4 ~
2.5 GHz Whip Antenna, 0 ~ 3 dBi gain, ~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 52 mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-Whip
$20
Vertical Whip Antenna Omni
Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50 ohms
impedance. Antenna for Wireless LAN, WiFi Network, Wireless
ADSL, Video Transmitters, etc.
Length: ~ 107 mm
straight, ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11
grams.
SMA male
Connector.
|
 |
Cat Code:
Ant-W5dB
$20
Vertical Whip
Antenna non-directional 2.4 ~ 2.5 GHz,
~ 5 dBi gain, ~ 50 ohms
impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @
Top. Weight: ~ 30 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-W12dB
$129
High Gain Vertical Whip
Antenna 2.4 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 1210 mm,
~ 1425 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~
22 mm main center section ~ 24 mm top cap. Weight: ~ 670
grams ~ 930 grams with Mounting Tube & Clamp/Bracket.
Supplied with Base
Mount Tube and Clamps/Brackets for surface or Tubular Mast
mounting.
N female
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-W15dB
$169
High Gain Vertical
Whip Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm
impedance. Beamwidth: Horizontal 360º, Vertical 11º. VSWR
(Voltage Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 1640 mm, ~ 1935 mm with Base Mount Tube. Diameter:
~ 42 mm @ Base ~ 20 mm main center section ~ 22 mm top cap.
Weight: ~ 680 grams ~ 950 grams with Mounting Tube &
Clamp/Bracket.
data sheet
N female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Discontinued
Cat
Code: Ant-Y15
$79
Yagi
Antenna for Wireless LAN,
WiFi Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~
2.5 GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58
Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35
mm, ~ 680 grams.
Supplied with ~ 140 x 70 mm Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation *
Mast not included.
SMA male Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y16C
$119
Yagi
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohms
impedance. Beamwidth: E28, H28.
Dimensions (excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~
750 grams, ~ 500 mm RG-58 Coax cable. Supplied with
Aluminium mounting plate, Clamps, etc. Pictured in Vertical
Polarity orientation * Mast not included.
SMA male Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y17.5C
$149
Yagi
Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~
800 grams, ~ 500 mm RG-58 Coax cable. Supplied with
Aluminium mounting plate, Clamps, etc. Pictured in Vertical
Polarity orientation * Mast not included.
SMA male Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-F16
$99
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi
gain, ~ 50 ohm impedance.
Beamwidth: ~ 27º (H) ~ 60º (V).
Supplied with versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast Clamps.
Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H)
~ 30 mm (D), ~ 740 grams.
Pictured in Vertical Polarity orientation
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code:
Ant-F18
$149
COMPACT Flat 2.3 ~
2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º
(H) ~ 75º (V). Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm
(D), ~ 950 grams.
Pictured in
Vertical Polarity orientation.
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code: Ant-F20
$179
Compact Flat 2.4 ~
2.5 GHz, ~ 20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30º
H90º. Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200
Watts. Antenna for Wireless LAN, WiFi Network, Wireless
ADSL, Video Transmitters, etc.
Supplied with 50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~
330 (H) ~ 40 mm (D). Weight ~ 1.65 kg including mounting
bracket. Tilt +/- ~ 20º.
Pictured in Vertical Polarity orientation.
data sheet
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat
Code: Ant-P10
$99
COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~
50 ohm impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied with Tubular Mast Clamp. Dimensions (excludes
Socket & Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235
grams.
Pictured in Vertical Polarity orientation.
SMA female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-P24
$199
Grid-Parabolic Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24
dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11º (H) ~ 7º (V).
Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with Clamps to suit 40 ~ 50 mm Tubular Mast,
bracket for Vertical or Horizontal mounting 60º Tilt in 10º
increments. Aluminium Grid (2 sections) ~ 1060 (W) ~ 600 (H)
mm assembled. Weight ~ 2.8 kg including mounting bracket.
Pictured in Horizontal Polarity orientation.
data sheet
N female Connector. <Adaptors
& Extension Cables>
|
Parabolic Yagi & Flat are directional antennas. Whip antennas
when used vertically are for most practical purposes omni or
non directional.
To maximise 'Range' minimise the
length of Coax Cable between Antenna and device.
  |
Cat Code: SMA-REVm
$10
Conventional SMA (external
thread, socket contact) to Reverse Polarity SMA
connector (internal thread, socket contact, Hex Nut)
Center Socket
Contact on both ends (no Pins), converts
Reverse Polarity SMA to conventional SMA (use with Netcomm
NB9W, etc)
|
 |
Cat Code: SMA-REVf
$10
Conventional SMA
connector (internal thread, pin contact, Hex Nut) to
Reverse Polarity SMA connector (external thread, pin
contact)
Central Pin
Contact on both ends.
|
  |
Cat Code: SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut) to N
female. Suitable for P18G & P24G discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas.
|
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna.
|
 |
Cat
Code: Cable-178/30
$19
30 cm
RG-178 Coax cable with SMA male & female connectors.
|
 |
Cat
Code: Cable-58/450
$39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~
1.4 dB/metre @ 5.8 GHz
Cat
Code: Cable-23/450N
$39
not pictured
~ 450 cm Coax Cable with SMA & N male
connectors. Attenuation ~ 0.75 dB/metre @ 2.4
GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable
for W12dB, W15dB, F16, F18, F20 & P24 antennas.
|
Antenna Gain... what does it mean ??? a simplified
explanation
Received signal strength from an antenna with 3 dBi gain will
be double that from an antenna that has 0 dBi gain, received
signal strength from a 6 dBi will be double that from a 3 dBi
and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output,
received signal strength or range can be increased by raising
antenna gain or transmitter output. Range can be doubled by
either increasing antenna gain by 6 dBi or quadrupling the
transmitter output.
Increasing the gain of the receiver antenna is an alternative
to increasing transmitter output.
In very simple terms: increasing antenna gain
from 0 dBi to 3 dBi is equivalent to raising the output power
of a 10 mW transmitter to ~ 20 mW, (5 dBi to ~ 33 mW) (12 dBi
to ~ 160 mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
|
Air